Electrical Conductivity Meter for Water - ConductiSense
Why is conductivity measurement important in water treatment?
The conductivity of water is extremely important when treating drinking water or industrial water because it gives an indication of the amount of dissolved material within that water.
Process Instruments supplies a range of high-quality low-cost conductivity sensors to cover the full range from deionized water all the way up to highly saturated brines.
Coupled with Pi’s controllers these sensors provide excellent and cost-effective process control in all industries and applications.
Conductivity is often seen as a minor measurement i.e not as important as some other measurements. ConductiSense from Pi is a stand-alone controller for the dedicated measurement of conductivity online and also allows for the connection of conductivity sensors to any other Pi analyzer. When coupled with the CRONOS® and CRIUS®4.0 controllers the conductivity sensors from Pi give you everything that you need and nothing that you don’t.
- Resists coating, corrosion and fouling
- Durable Noryl (plastic) construction (Toroidal sensor)
- Easy installation
- Low purchase cost
- Custom tee for in-line mounting
Graphite – Our light industrial standard conductivity sensor uses a graphite sensor. The epoxy body construction provides a rugged and dependable sensor for potable water and clean water. Mount them in-line, in a pipe “T” fitting, or submerse them into a tank.
Toroidal – The toroidal inductive conductivity sensors features a wide measurement range and dependable toroidal technology over the range 0-2,000,000 μS/cm. Noryl is the standard construction material and has a wide solvent tolerance and temperature stability to 105°C. All models can be submersed by utilizing the 3/4” NPT threads on the sensor or installed in 2” NPT tees for in-line deployment. They also have in-built temperature sensors within the conductivity sensor for automatic temperature compensation.
Stainless Steel – The stainless steel conductivity sensors utilize the same measurement technology as the graphite sensors giving the same reliability of measurement but in a more robust, and resistant, body. This added robustness over the standard graphite probe, means that they can be used in high pressure and/or high temperature environments, for example boiler or CIP applications.
Document | Type | Size |
---|---|---|
ConductiSense | Brochure | 656kB |
Conductivity Background and Measurement | Article | 947kB |
FAQs
What do conductivity sensors measure?
Conductivity sensors measure the ability of solutions to conduct electrical current. This is related to the ionic species that are present in that solution and can be defined as ‘the conductance in a given volume’.
What is a conductivity meter used for?
A Conductivity meter gives accurate measurements of the conductivity in solutions. Conductivity creates the ability of materials (solutions, gasses, or metals) to pass through an electrical current. While every material can pass through electrical currents, the level of such ability can vary.
What is the relationship between conductivity and conductance?
Although they are similar terms which are related, conductance is more general in that it refers to a solutions ability to conduct electric current, whereas conductivity refers to conductance in a given volume. This is evidenced in the units of conductivity, which is usually measured in μS/cm or μΩ/cm.
If the temperature varies, what will happen?
All three models of ConductiSense have integrated temperature compensation as standard, so although changes in temperature do affect conductivity readings this is accounted for in your Pi hardware and firmware. ConductiSense will remain accurate despite temperature changes.
Can conductivity only be measured in aqueous solutions?
Conductivity measurement is not restricted to aqueous solutions. The solution being measured may affect the choice of sensor (organic compounds such as petroleum products have very low conductivities, for example), and safety can also be a concern, such as when measuring flammable liquids.
What is a K value and why are there different ones?
In practical terms, the cell constant (K value) refers to the distance between the electrodes within the sensor, with a lower number meaning a smaller distance. It is calculated by dividing the area (a) normal to the current flow squared by the distance (d) between the electrodes. Low K value sensors are used in lower conductivity solutions, where the smaller distance raises the conductance allowing for easier measurement. The opposite is true in high conductivity solutions, where a larger K value may be more suitable. Pi sensors are available in K values of 0.1, 1 and 10.
What is the relationship between conductivity and TDS?
The variation of conductivity in water is due to the substances dissolved in it, which are referred to as Total Dissolved Solids (TDS). TDS is measured in terms of mass and volume (g/l, for example), but multipliers can be used to convert this into conductivity if the ionic species are known. Sodium chloride, for example, uses a standard multiplier of 0.65.
What is conductivity meter basic principle?
Conductivity is the ability of a material to conduct an electric current. How is this measured? Two plates are placed in a sample, then a potential is applied across the plates (usually a sine wave voltage) and then the current that passes through the sample is then measured.
Why do we test conductivity in water?
The testing of conductivity in water is very important because it tells us how much dissolved substances, chemicals, and minerals are present in the water. High amounts of these impurities will lead to a higher conductivity.
There is a difference between my dissolved solids and those in the calibration solution. How do I calibrate my meter?
Creating a standard solution yourself, which matches your sample stream more accurately, is a way to get a more accurate calibration. A proportional mixture of salts based on your sample stream can be added to distilled water, where 1mg of your salt mixture 1l of distilled water will yield a 1ppm TDS solution. Try to produce a standard that is close to your expected sample in concentration, or If you expect a great deal of variation make a solution that is in the upper third of the sensor range.
How are micromhos (µ℧/cm) and microsiemens (μS/cm) related?
Micromhos (µ℧/cm) and microsiemens (μS/cm) are the same. The former is more common in the U.S. and the latter is more common in Europe, but the two terms can be used interchangeably.
How do I keep my conductivity electrode clean?
Agitate your sensor in a mild detergent or dilute nitric acid (0.1M) solution for a few minutes and then rinse with clean water. This should be sufficient, but dilute solutions of sulfuric or hydrochloric acid can also be used to remove any fouling if required.
How should my conductivity electrode be stored?
The sensor can be stored wet or dry, but rinse with clean tap water when removing the sensor from the sample stream. Please note that if storing the sensor dry, the electrodes will need to be reconditioned before being used again.
How should I condition/recondition my probe?
Ensure that power is running to the sensor, and give it a short (30-60 mins) soak in a standard solution (tap water will also suffice) before use.
What is the relationship between conductivity and salinity?
Salinity is a measure of the amount of salts in water, and so it is related to conductivity. A correction factor can be used to convert between these units, from microsiemens to the ppm of a specific salt.
Can I use other conductivity probes with Pi analyzers?
It is often possible to integrate other sensors into Pi hardware. Please contact a member of our team, and we will be happy to discuss this with you.
"The Pi products provide excellent value for money and represent the best municipal drinking water analyzers available."
John Clark
Chemtrac - Atlanta
"The support from Pi and its partners is superb. They go above and beyond to ensure that, not only is their equipment perfect but that the process is working great too. Five Stars!"
Anthony Glitto
Equip Solutions - Illinois, USA
"Going from ORP control to amperometric chlorine sensor control has undoubtedly improved the pool water immensely!"
Chris Tedeschi
Link Automation - USA
"We've been using these analyzers since 2008. They're easy to use and very stable. Calibration and maintenance is quick and simple."
Lloyd Gruginski
Chehalis WTP - Chehalis, WA
"We at Scottish Water have been using the excellent Pi LabSense 3 and portable UV254 instruments in the field for optimizing our Water Treatment processes for some years now. We find them easy to use and invaluable for detecting and resolving issues in a timely, efficient and effective manner. Two great pieces of kit!”
Paul Weir
Scottish Water - UK
"I want to thank you and all at Process Instruments for all the assistance, information and handholding during the year. The help that was so freely given was very much appreciated. Can you please extend my appreciation to all at Pi and let me wish you all a happy, safe and wonderful Christmas and I look forward to working with you again in 2021."
Michael Bailey
Wexford Co. Co. - Ireland
"Excellent level of support and always so much more prompt than a lot of our suppliers."
Phill Tuxford
Detectronic - UK
"The plant can’t produce good quality water without the CoagSense."
Mick Murphy
Wexford Co. Co. - Ireland
"We started using Process Instruments 10 years ago and they worked so well that when we were looking at expanding, Process Instruments were our "go to" company."
Rebecca - Pool Manager
Woodland Spa - Burnley, UK
"We've been installing pools and spa controllers from Pi for more than 10 years and they just are the best on the market."
Dr. Lester Symmonds
Pool Sentry - UK
"We've used the CRIUS® with chlorine, pH and conductivity sensors for several years and confirm quality, performance and reliability has been wholly satisfactory to date."
David Kerr
Karis Technical Services Ltd. - UK
"We in ECM ECO Monitoring can only recommend Process Instruments products and services to all other potential clients. They have very complex portfolio of products for water quality monitoring in various types of industries, friendly attitude, very quick delivery time and prompt reaction to all our needs and inquires. Our clients especially appreciate the particle counters and sizers allowing identification of drinking water treatment problems. The Streaming Current Monitors are a great tool for optimisation of expensive chemicals.”
Branislav
ECM ECO Monitoring - Slovakia
"Simply the best turbidity available."
John Clark
Chemtrac - Atlanta, GA
"In 2019, we purchased 29 particle counters which were installed in our water plants. So far, their performance has been perfect."
Li Yongjun
Jinan Hongquan Water Company - China
"We have installed hundreds of ozone analyzers from Pi over the years. They are just accurate, reliable and require low maintenance."
Jiao Tumei
Qingdao Guolin Environmental Technology Co., Ltd., - China
"Over the last few years we've purchased chlorine and turbidity analyzers from Chemtrac and with routine calibration the probes measure the chlorine and turbidity without any issue. We are very happy with this product and would highly recommend them."
Daniel "Buck" Owen
Ocoee Utility District - Ocoee TN
“Servicing customers is much more than just solving problems or addressing complaints and Pi does that very competently with technical and quick efforts providing a good experience."
Clovis Tuchapski
Buckman - Latin America
"Pi's technical team has enabled us to be one step ahead of our competitors by adding value to our projects thanks to their fast and excellent support from the moment you first reach out.
Ibrahim Kaplin
Thermomed - Turkey
"The Streaming Current Monitor from Pi is the best SCM I have ever used. The analyser responds quickly and has many powerful functions, which helps me save a lot of money."
Ye Yancong
Xiamen Xishan Water Plant - China
“Process Instruments has a broad range of high quality and user-friendly solutions for water-industry problems. The short lead times and great customer support make Pi a reliable partner.”
Péter Szabó
SC KATALIN NOHSE CHIMIST IMPORT SRL - Romania
"Process Instruments UK always have a high level of customer service. All our interactions with Pi have exceeded our expectations. It is always a pleasure working with you.”
Iñaki Seisdedos Rodríguez
Izasa Scientific - Spain
"Process Instruments UK always have a high level of customer service. All our interactions with Pi have exceeded our expectations. It is always a pleasure working with you.”
Rudi Tuffek
Allpronix - South Africa
Behövs hjälp?
Filip Börjesson
Kontakta Filip
Tel: +46 533 15060
info@paab.com